About-brakes.com - welcome on our site. You can find here a lot information about brakes, brake pads and brake linings.


Parking Brakes


The parking brake (a.k.a. emergency brake)  system controls the rear brakes through a series of steel cables that are connected to either a hand lever or a foot pedal.  The idea is that the system is fully mechanical and completely bypasses the hydraulic system so that the vehicle can be brought to a stop even if there is a total brake failure.

On drum brakes, the cable pulls on a lever mounted in the rear brake and is directly connected to the brake shoes. this has the effect of bypassing the wheel cylinder and controlling the brakes directly.
Disk brakes on the rear wheels add additional complication for parking brake systems.  There are two main designs for adding a mechanical parking brake to rear disk brakes. The first type uses the existing rear wheel caliper and adds a lever attached to a mechanical corkscrew device inside the caliper piston.  When the parking brake cable pulls on the lever, this corkscrew device pushes the piston against the pads, thereby bypassing the hydraulic system, to stop the vehicle.  This type of system is primarily used with single piston floating calipers, if the caliper is of the four piston fixed type, then that type of system can't be used.  The other system uses a complete mechanical drum brake unit mounted inside the rear rotor. The brake shoes on this system are connected to a lever that is pulled by the parking brake cable to activate the brakes. The brake "drum" is actually the inside part of the rear brake rotor.

On cars with automatic transmissions, the parking brake is rarely used.   This can cause a couple of problems.  The biggest problem is that the brake cables tend to get corroded and eventually seize up causing the parking brake to become inoperative.  By using the parking brake from time to time, the cables stay clean and functional. Another problem comes from the fact that the self adjusting mechanism on certain brake systems uses the parking brake actuation to adjust the brakes.  If the parking brake is never used, then the brakes never get adjusted.

C 2006 PORTADA.Pl, All Ri ghts Reserved | contact | main site